A self-tapping screw is a type of screw that is designed to create its own thread as it is driven into a material. Unlike traditional screws, which require a pre-drilled hole with a matching thread, self-tapping screws have a unique design that allows them to cut into the material and form their own threads during the installation process.These screws are commonly used in applications where it may be difficult or impractical to create pre-drilled holes, such as in metal or hard plastics.Self-tap

Using self-tapping screws is a fairly straightforward process. Follow our step-by-step guide on how to use self-tapping screws:1. Choose the Right ScrewSelf-tapping screws come in various sizes and types, so it's essential to select the right screw for your project. Consider factors such as the material you are working with and the thickness of the materials being joined.2. Mark the Screw PlacementMark the locations where you want to insert the screws on the materials you are joining. Use a

Choosing the right screw size is important - if it is too loose or doesn’t screw in completely, it isn’t the right screw!Then how to choose the right size? The answer is to fully consider the thickness of the material you are using and the finish you are looking for from the project.Remember, it is easier to make a hole bigger than it is to make it smaller again, so if you’re unsure, try a smaller screw first and then go bigger if needed.

Having the correct components when carrying out building tasks is crucial to ensure your tasks go smoothly and to plan. If yourscrewsare too short or too long, it’s likely to throw a spanner in the works.Measuring a screw may seem straightforward, but if you’re not sure which exact part of the screw you need to measure, it may not be so obvious. Our step-by-step guide breaks down how to measure the size of a screw correctly so that you can find the right size parts for your project.Imperial vs

When fixing plasterboard to your walls, you might be wondering how many screws you’ll need to secure it in place properly. Our guide explores the types of plasterboard screws to use, how many you’ll need per sheet of plasterboard, as well tips on how to install plasterboard/drywall correctly.What are the Best Screws for Plasterboard?So, can you use regular screws for plasterboard? The short answer is no. It’s best to use specialist screw fixings with deeper threads and bugle heads. Depending

1.Don’t over-countersink the screw. The head of the screw should sit just underneath the plasterboard’s surface. If it’s screwed in too deep, the plasterboard could fall away from the fixing. Screws mustn’t sit above the surface either, as this will obstruct the finish.2.On rare occasions, black screw platings can react with finish types, which can damage the screw and cause corrosion. We recommend applying a PVA bonding to the heads of the screws before finishing.3.Use the correct length sc

Self-drilling screws are a type of screw used in a variety offastening and fixingapplications. Typically made from stainless steel, self-drilling screws are characterizedby their drill-shaped point. This point enables the screws to drill into materials without the need for pre-drilled pilot holes, resulting in a more efficient fastening process.Available in a range of sizes, lengths, and thicknesses, self-drilling screws are handy and versatile. They are sometimes also known as Tek screws. Tek w